Palladium-catalyzed reaction of aryl iodides with acetic anhydride. A carbon monoxide-free synthesis of acetophenones

[reaction: see text] The palladium-catalyzed reaction of aryl iodides with acetic anhydride provides a straightforward and experimentally simple carbon monoxide-free route to acetophenones. The reaction tolerates a wide range of functionalized aryl iodides. Acetophenones are isolated in excellent yield with a variety of neutral, slightly electron-rich, and slightly electron-poor aryl iodides, whereas moderate yields are obtained with aryl iodides containing strongly electron-withdrawing substituents.     

Characterization of dendrimer properties by capillary electrophoresis and their use as pseudostationary phases

The general properties of dendrimers and in particular their electrolytic characteristics that are relevant in electrokinetic separations, are described. In order to confirm theoretical considerations on commercial dendrimer charge and hydrodynamic radius, several capillary zone electrophoresis (CZE) experiments were performed. Electrophoretic mobilities measured at different pH values indicated a sensible increase of dendrimer hydrodynamic radius at pH values lower than 2.5. This was probably due to the Coulombic repulsion of charged amine groups of the inner dendrimer shells. The principal reasons that should address the use of dendrimers as pseudostationary phases in micellar electrokinetic chromatography (MEKC) are discussed. Moreover, a survey of different separations performed utilizing dendrimers in MEKC as well as of several future plausible uses of various classes of dendrimers is presented.     

Thermogravimetry as a screening tool for the estimation of the vapor pressures of pure compounds

A simplified approach was developed to estimate the vapor pressure of pure compounds from experimental data obtained by isothermal thermogravimetric (TG) analysis. A numerical procedure was developed to estimate the Antoine parameters of the substance by the analysis of isothermal TG data. The results of the experimental validations carried out evidenced that at least a preliminary estimation of vapour pressures of pure substances by the analysis of TG data is possible. The limited time and the reduced amounts of sample required for the experimental runs make the technique attractive with respect to the conventional and more accurate techniques for vapor pressure assessment.     

New 1,2,3‐triazolo[4,5‐e]1,2,4‐triazolo[4,3‐c]pyrimidine derivatives II

The 7‐chloro‐3‐(2‐chlorobenzyl)‐ and 7‐chloro‐3‐(2‐fluorobenzyl)‐1,2,3‐triazolo[4,5‐d]pyrimidines ( 1 and 4 ), by nucleophilic replacement with some hydrazides, gave the corresponding 7‐hydrazidoderivatives ( 2a‐e and 5a‐e ). These, by heating in Dowtherm, underwent an intramolecular cyclization to form the new tricyclic 7‐substituted‐3‐(2‐chlorobenzyl)‐ and 3‐(2‐fluorobenzyl)‐1,2,3‐triazolo[4,5‐e]1,2,4‐triazolo[4,3‐c]pyrimidines ( 3a‐d and 6a‐d ). The 7‐hydrazino‐3‐(2‐chlorobenzyl)‐ and 7‐hydrazino‐3‐(2‐fluorobenzyl)‐triazolo‐pyrimidines ( 9a and 9b ) were also prepared via the corresponding mercapto ( 7a and 7b ) and thiomethyl ( 8a and 8b ) derivatives.     

Statistical experimental design-driven discovery of room-temperature conditions for palladium-catalyzed cyanation of aryl bromides

A combination of Pd₂(dba)₃·CHCl₃ (0.5 mol %) and commercially available, air-stable phosphonium salt [(t-Bu)₃PH]BF₄ (1.4 mol %) in a presence of Zn powder and Zn(CN)₂ as the cyanide source comprises an extremely efficient catalyst system for the cyanation of a diverse array of aryl bromides, at room temperature. This result emerged from an experimental strategy that combines the advantages of parallel, automated experimentation with the design of experiments (DOE) for the effective definition of an optimal set of reaction conditions.     

Environmentally degradable bio-based polymeric blends and composites

Blends and composites based on environmentally degradable-ecocompatible synthetic and natural polymeric materials and fillers of natural origin have been prepared and processed under different conditions. Poly(vinyl alcohol) (PVA) was used as the synthetic polymer of choice by virtue of its capability to be processed from water solution or suspension as well as from the melt by blow extrusion and injection molding. Starch and gelatin were taken as the polymeric materials from renewable resources. The fillers were all of natural origin, as waste from food and agro-industry consisted of sugar cane bagasse (SCB), wheat flour (WF), orange peels (OR), apple peels (AP), corn fibres (CF), saw dust (SD) and wheat straw (WS). All the natural or hybrid formulations were intended to be utilized for the production of: a) Environmentally degradable mulching films (hydro-biomulching) displaying, in some cases, self-fertilizing characteristics by in situ spraying of water solutions or suspensions; b) Laminates and containers to be used in agriculture and food packaging by compression and injection molding followed by baking. Some typical prototype items have been prepared and characterized in relation to their morphological and mechanical properties and tested with different methodology for their propensity to environmental degradation and biodegradation as ultimate stage of their service life. A relationship between chemical composition and mechanical properties and propensity to biodegradation has been discussed in a few representative cases.     

CO(2) Fixation by Novel Copper(II) and Zinc(II) Macrocyclic Complexes. A Solution and Solid State Study

Solutions containing Zn(II) and Cu(II) complexes with [15]aneN(3)O(2) rapidly adsorb atmospheric CO(2) to give {[ZnL](3)(&mgr;(3)-CO(3))}.(ClO(4))(4) (2) and {[CuL](3)(&mgr;(3)-CO(3))}.(ClO(4))(4) (4) complexes. The crystal structures of both complexes have been solved (for 2, space group R3c, a, b = 22.300(5) ?, c = 17.980(8) ?, V = 7743(4) ?(3), Z = 6, R = 0.0666, R(w)(2) = 0.1719; for 4, space group R3c, a, b = 22.292(7) ?, c = 10.096(8) ?, V = 7788(5) ?(3), Z = 6, R = 0.0598, R(w)(2) = 0.1611), and the spectromagnetic behavior of 4 has been studied. In both compounds a carbonate anion triply bridges three metal cations. Each metal is coordinated by one oxygen of the carbonate, three nitrogens, and an oxygen of the macrocycle; the latter donor weakly interacts with the metals. Although the two compounds are isomorphous, they are not isostructural, because the coordination geometries of Zn(II) in 2 and Cu(II) in 4 are different. The mixed complex {[CuZn(2)L(3)](&mgr;(3)-CO(3))}.(ClO(4))(4) has been synthesized. X-ray analysis (space group R3c, a, b = 22.323(7) ?, c = 17.989(9) ?, V = 7763(5) ?(3), Z = 6, R = 0.0477, R(w)(2) = 0.1371) and EPR measurements are in accord with a &mgr;(3)-carbonate bridging one Cu(II) and two Zn(II) ions in {[CuZn(2)L(3)](&mgr;(3)-CO(3))}(4+). Both the Zn(II) and Cu(II) cations exhibit the same coordination sphere, almost equal to that found in the trinuclear Zn(II) complex 2. The systems Zn(II)/L and Cu(II)/Lhave been studied by means of potentiometric measurements in 0.15 mol dm(-)(1) NaCl and in 0.1 mol dm(-)(3) NaClO(4) aqueous solutions; the species present in solution and their stability constants have been determined. In both systems [ML](2+) species and hydroxo complexes [M(II)LOH](+) (M = Zn, Cu) are present in solution. In the case of Cu(II), a [CuL(OH)(2)] complex is also found. The process of CO(2) fixation is due to the presence of such hydroxo-species, which can act as nucleophiles toward CO(2). In order to test the nucleophilic ability of the Zn(II) complexes, the kinetics of the promoted hydrolysis of p-nitrophenyl acetate has been studied. The [ZnLOH](+) complex promotes such a reaction, where the Zn(II)-bound OH(-) acts as a nucleophile to the carbonyl carbon. The equilibrium constants for the addition of HCO(3)(-) and CO(3)(2)(-) to the [ZnL](2+) complex have been potentiometrically determined. Only [ML(HCO(3))](+) and [ML(CO(3))] species are found in aqueous solution. A mechanism for the formation of {[ML](3)(&mgr;(3)-CO(3))}.(ClO(4))(4) is suggested.     

New N6‐substituted 8‐alkyl‐2‐phenylmethylsulfanyl‐adenines. II

Title compounds bearing substituents on C(2), C(6) and C(8) were prepared from a newly synthesized pyrimidine derivative 11. The new pyrimidine 11 was generated from compound 2 through two different synthetic schemes. In one pathway, compound 2 was nitrosated, reduced and alkylated to produce com pounds 9 , 10 and 11 respectively (Scheme). In an alternate route using compound 2 as the starting material, a coupling reaction using the diazonium salt derived from p‐methylaniline afforded the azo derivative 7 , which was subsequently alkylated and reductively cleaved to form compounds 8 and 11 respectively (See Scheme). Compound 11 was annulated to the corresponding hypoxanthine derivatives 12–14 ; compounds 12 and 13 were chlorinated with phosphorus oxychloride, then reacted with amines to yield compound 17 and 20 respectively. Compounds 21 , 22 and 23 were obtained by oxidation of the corresponding sulfide as depicted in Scheme. Alkylation of the thiol function of 1 gave a mixture of 3 and 4. Compound 3 was chlo rinated to 5. Nitration of 5 resulted in electrophilic aromatic substitution of the aryl ring and concomitant oxidation of the sulfide to the sulfoxide, producing 6.     

Lanthanide Identity Governs Guest-Induced Dimerization in LnIII[15-MC N(L-pheHA)-5])3+ Metallacrowns

Series of lanthanide-containing metallic coordination complexes are frequently presented as structurally analogous, due to the similar chemical and coordinative properties of the lanthanides. In the case of chiral (Ln^III[15-MC _N(L-pheHA)-5])³⁺ metallacrowns (MCs), which are well established supramolecular hosts, the formation of dimers templated by a dicarboxylate guest (muconate) in solution of neutral pH is herein shown to have a unique dependence on the identity of the MC's central lanthanide. Calorimetric data and nuclear magnetic resonance diffusion studies demonstrate that MCs containing larger or smaller lanthanides as the central metal only form monomeric host-guest complexes whereas analogues with intermediate lanthanides (for example, Eu, Gd, Dy) participate in formation of dimeric host-guest-host compartments. The driving force for the dimerization event across the series is thought to be a competition between formation of highly stable MCs (larger lanthanides) and optimally linked bridging guests (smaller lanthanides).